Send the meter to a NIST-traceable calibration lab. The lab measures the meter against reference standards at multiple wavelengths and power levels and issues a certificate with the deviations. EXFO can help save both time and costs with an automated calibration test system that is designed for the verification of power meters, attenuators, sources and optical time-domain reflectometers (OTDRs). This application note demystifies how EXFO's IQS-12002 Optical Calibration System can guide. Calibrate every 12 months. Furthermore nearly all existing quality assurance standards, norms and procedures such as ISO/IEC 9001 or ISO/IEC 17025 require a periodic quality. An optical power meter is the most common type of test equipment used to support fiber optic system.
[pdf] Power meter measurement in five steps: 1) Clean the meter port and the patch cord. 5) Read the value, and compare against the link budget. Skip. An optical power meter measures the photon energy in the form of current or voltage from an optical detector such as a semiconductor, a thermopile, or a pyroelectric detector.
[pdf] This power meter is specifically designed for the XG-PON network, measuring downstream signals at 1490nm and 1577nm. It also includes a standard optical power meter function. The internal isolator effectively filters out the 1490nm and 1577nm signals, while still measuring other. An in-line PON meter used during 10G FTTH / PON service turn-up or maintenance, to perform a live test with the OLT equipment. To view the full specifications, download the spec sheet below. The PPM1 leverages a unique patented technology that makes all the difference in the field. Choosing a selection results in a full page refresh. Fast charging for 3 hours, continuous use in optical power meter mode for 60 hours, full power shutdown for 90 days of long standby time Note: For the 1490/1577 version, only one SC APC connector.
[pdf] A passive optical network (PON) is a telecommunications network that uses only unpowered devices to carry signals, as opposed to electronic equipment. In practice, PONs are typically used for the between (ISP) and their customers. In this use, a PON has a topology in which an ISP uses a single device to serve many end-user sites using a system suc.
[pdf] The optical power meter usually reads in dBm for power measurements or dB with respect to a user-set reference value for loss. Here is a graph that shows the relationship of dBm to milliwatts and microwatts. Using this equation, 10 dB is a ratio of 10 times (either 10 times as much or. Measurements of optical power are expressed in units of dBm. The dBm scale is logarithmic, meaning a small numerical change represents a large change in actual light power.
[pdf] 
